| const int FWSPECS_CLOCK_1024 = 0 |
This constant represents the clock frequency of 1024 KHz.
| const int FWSPECS_CLOCK_128 = 3 |
This constant represents the clock frequency of 128 KHz.
| const int FWSPECS_CLOCK_16 = 6 |
This constant represents the clock frequency of 16 KHz.
| const int FWSPECS_CLOCK_256 = 2 |
This constant represents the clock frequency of 256 KHz.
| const int FWSPECS_CLOCK_32 = 5 |
This constant represents the clock frequency of 32 KHz.
| const int FWSPECS_CLOCK_512 = 1 |
This constant represents the clock frequency of 512 KHz.
| const int FWSPECS_CLOCK_64 = 4 |
This constant represents the clock frequency of 64 KHz.
| const int FWSPECS_DCU = 4 |
This constant represents DCU.
| const int FWSPECS_DCU_AREG = 2 |
This constant represents the DCU Auxiliary register.
| const int FWSPECS_DCU_CREG = 0 |
This constant represents the DCU Control register.
| const int FWSPECS_DCU_HIR = 0 |
This constant represents the DCU HIR mode.
| const int FWSPECS_DCU_IA0 = 0 |
This constant represents the DCU input analog channel 0 (IA0/IOUT20).
| const int FWSPECS_DCU_IA1 = 1 |
This constant represents the DCU input analog channel 1 (IA1).
| const int FWSPECS_DCU_IA2 = 2 |
This constant represents the DCU input analog channel 2 (IA2).
| const int FWSPECS_DCU_IA3 = 3 |
This constant represents the DCU input analog channel 3 (IA3).
| const int FWSPECS_DCU_IA4 = 4 |
This constant represents the DCU input analog channel 4 (IA4).
| const int FWSPECS_DCU_IA5 = 5 |
This constant represents the DCU input analog channel 5 (IA5).
| const int FWSPECS_DCU_IA6 = 6 |
This constant represents the DCU input analog channel 6 (IA6).
| const int FWSPECS_DCU_IA7 = 7 |
This constant represents the DCU input analog channel 7 (IA7/Temperature).
| const int FWSPECS_DCU_LIR = 1 |
This constant represents the DCU LIR mode.
| const int FWSPECS_DCU_LREG = 3 |
This constant represents the DCU Data Low register. Note: this register is read only.
| const int FWSPECS_DCU_SHREG = 1 |
This constant represents the DCU Status & Data High register. Note: this register is read only.
| const int FWSPECS_DCU_TREG = 4 |
This constant represents the DCU Test register.
| const int FWSPECS_I2C = 0 |
This constant represents I2C.
| const int FWSPECS_I2C_COMBINED = 0 |
This constant represents the I2C combined operation.
| const int FWSPECS_I2C_COMBINED_FIFO = 5 |
This constant represents the I2C Beetle Shift Registers operation.
| const int FWSPECS_I2C_COMBINED_READ = 2 |
This constant represents the I2C CALO operation.
| const int FWSPECS_I2C_NOSUB_NOAUTOINC = 6 |
This constant represents the I2C Delay25 operation (no sub-addressing and no auto-inc).
| const int FWSPECS_I2C_SEPARATED = 1 |
This constant represents the I2C separated operation (write sub-address to address+1).
| const int FWSPECS_I2C_SEPARATED_NOAUTOINC = 3 |
This constant represents the I2C TTCRx and GOL operation.
| const int FWSPECS_I2C_SEPARATED_READ = 4 |
This constant represents the I2C OT FPGA operation.
| const int FWSPECS_JTAG = 1 |
This constant represents JTAG.
| const int FWSPECS_PBUS = 2 |
This constant represents PBUS.
| const int FWSPECS_REG = 3 |
This constant represents REG.
| const int FWSPECS_REG_BUSSEL = 6 |
This constant represents the Serial Bus Selection register.
| const int FWSPECS_REG_CHANBDELAY = 10 |
This constant represents the Channel B register.
| const int FWSPECS_REG_CONFREGOUTLSB = 3 |
This constant represents the Output Pins Configuration register (LSB).
| const int FWSPECS_REG_CONFREGOUTMSB = 2 |
This constant represents the Output Pins Configuration register (MSB).
| const int FWSPECS_REG_DATEPROM = 8 |
This constant represents the Date register. Note: this register is read only.
| const int FWSPECS_REG_DEFINTVECT = 9 |
This constant represents the Masks of Interrupt register.
| const int FWSPECS_REG_INTVECT = 7 |
This constant represents the Interrupt register.
| const int FWSPECS_REG_MEZZACTRL = 4 |
This constant represents the Control register.
| const int FWSPECS_REG_MEZZASTAT = 5 |
This constant represents the Status register. Note: this register is read only.
| const int FWSPECS_REG_REGOUTLSB = 1 |
This constant represents the Output Pins Control register (LSB).
| const int FWSPECS_REG_REGOUTMSB = 0 |
This constant represents the Output Pins Control register (MSB).
| const int FWSPECS_REG_TESTLSB = 1 |
This constant represents the Test register (LSB).
| const int FWSPECS_REG_TESTMSB = 0 |
This constant represents the Test register (MSB).
| const int FWSPECS_SERVER_VERSION = 301 |
This constant represents the SpecsServer version needed by this Client.
| const int FWSPECS_SLAVE_LEDS_OFF = 1 |
This constant represents the slave leds OFF.
| const int FWSPECS_SLAVE_LEDS_ON = 0 |
This constant represents the slave leds ON.
| const int FWSPECS_SLAVE_RESET_EXTERNAL = 1 |
This constant represents the external slave reset mode (long pulse).
| const int FWSPECS_SLAVE_RESET_EXTERNAL_SHORT = 2 |
This constant represents the external slave reset mode (short pulse).
| const int FWSPECS_SLAVE_RESET_INTERNAL = 0 |
This constant represents the internal slave reset mode.
1.4.7